Intermediate Algebra 2e — Original English

Decimals

Round Decimals

Decimals are another way of writing fractions whose denominators are powers of ten.

0.1=110is “one tenth” 0.01=1100is “one hundredth” 0.001=11000is “one thousandth” 0.0001=110,000is “one ten-thousandth”

Just as in whole numbers, each digit of a decimal corresponds to the place value based on the powers of ten. Figure 1 shows the names of the place values to the left and right of the decimal point.

This table is labeled place value and has 12 columns. The seventh column is blank. Starting from here and going left the columns are labeled: ones, tens, hundreds, thousands, ten thousands, hundred thousands. Starting from the blank column and going right the columns are labeled: tenths, hundredths, thousandths, ten thousandths hundred thousandths. There is a dot under the blank column.

When we work with decimals, it is often necessary to round the number to the nearest required place value. We summarize the steps for rounding a decimal here.

Round 18.379 to the nearest hundredth tenth whole number.

Solution

Round 18.379.

to the nearest hundredth

Locate the hundredths place with an arrow. An image illustrating the hundredths place in the number 18.379, with an arrow pointing from the text 'hundredths place' to the digit '7'.
Underline the digit to the right of the given
place value.
The number 18.379 is shown, with an arrow pointing from 'hundredths place' to the underlined digit '7', indicating its position in the decimal.
Because 9 is greater than or equal to 5, add 1 to
the 7.
Rounding 18.379: The image illustrates rounding the number 18.379. The digit '7' in the hundredths place has '1' added to it, and the digit '9' in the thousandths place is deleted, resulting in 18.38.
Rewrite the number, deleting all digits to the
right of the rounding digit.
The numbers 18.38 are displayed prominently against a white background.
Notice that the deleted digits were NOT
replaced with zeros.
The text states that 18.379 rounded to the nearest hundredth is 18.38, demonstrating a basic principle of decimal rounding in mathematics.

to the nearest tenth

Locate the tenths place with an arrow.      An arrow points from 'tenths place' to the digit '3' in the number 18.379, illustrating the position of the tenths place in a decimal number.
Underline the digit to the right of the
given place value.
An arrow points from the text 'tenths place' to the digit '3' in the number 18.379, indicating that '3' is in the tenths place.
Because 7 is greater than or equal to 5,
add 1 to the 3.
An illustration shows how to transform the number 18.379 by adding 1 to its integer part '18' and deleting its decimal part '.379', resulting in 19.
Rewrite the number, deleting all digits to
the right of the rounding digit.
The number 18.4 is displayed in dark gray text against a plain white background.
Notice that the deleted digits were NOT
replaced with zeros.
The text states, 'So, 18.379 rounded to the nearest tenth is 18.4.'

to the nearest whole number

Locate the ones place with an arrow.     An arrow pointing from 'ones place' to the digit 8 in the number 18.379, illustrating the location of the ones place value in a decimal number.
Underline the digit to the right of the
given place value.
An image illustrating the concept of place value, specifically pointing to the 'ones place' in the number 18.379. An arrow from 'ones place' indicates the digit '8'.
Since 3 is not greater than or equal to 5,
do not add 1 to the 8.
Instructions for truncating the number 18.379: delete the decimal part (.379) and do not add 1 to the integer (18).
Rewrite the number, deleting all digits to
the right of the rounding digit.
The number 18 is displayed in a clear, black font against a plain white background, occupying the central upper portion of the image.
Text explaining rounding: 'So, 18.379 rounded to the nearest whole number is 18.'

Add and Subtract Decimals

To add or subtract decimals, we line up the decimal points. By lining up the decimal points this way, we can add or subtract the corresponding place values. We then add or subtract the numbers as if they were whole numbers and then place the decimal point in the sum.

Add or subtract: −23.541.38 14.6520.

Solution
Step-by-step calculation demonstrating the subtraction of negative decimal numbers.
−23.541.38
The difference will be negative. To subtract, we add the numerals. Write the numbers so the decimal points line up vertically. 23.5+41.38______
Put 0 as a placeholder after the 5 in 23.5.
Remember, 510=50100 so 0.5=0.50.
23.50+41.38______
Add the numbers as if they were whole numbers.
Then place the decimal point in the sum.
23.50+41.38______64.88
Write the result with the correct sign. −23.541.38=−64.88
Step-by-step guide on subtracting a decimal from a whole number, illustrating decimal alignment, placeholders, and obtaining a negative result.
14.6520
The difference will be negative. To subtract, we subtract 14.65 from 20.
Write the numbers so the decimal points line up vertically. 20−14.65______
Remember, 20 is a whole number, so place the decimal point after the 0.
Put in zeros to the right as placeholders. 20.00−14.65______
Subtract and place the decimal point in the answer. 99110101020.00−14.65______________ 5.35
Write the result with the correct sign. 14.6520=−5.35

Multiply and Divide Decimals

When we multiply signed decimals, first we determine the sign of the product and then multiply as if the numbers were both positive. We multiply the numbers temporarily ignoring the decimal point and then count the number of decimal points in the factors and that sum tells us the number of decimal places in the product. Finally, we write the product with the appropriate sign.

Multiply: (−3.9)(4.075).

Solution
(−3.9)(4.075)

The signs are different. The product
will be negative.

The product will be negative.
Write in vertical format, lining up the
numbers on the right.

A vertical multiplication problem shows 4.075 multiplied by 3.9.
Multiply. A long multiplication calculation of 4.075 by 3.9, with partial products leading to a sum of 158925.

Add the number of decimal places in
the factors (1 + 3).
Place the decimal point 4 places from the right.
A step-by-step example of multiplying 4.075 by 3.9, resulting in 15.8925, demonstrating how the decimal places are counted in the product.
The image displays two numbers, (-3.9) and (4.075), indicating their respective number of decimal places: 1 place for -3.9 and 3 places for 4.075.
The signs are the different, so the product is negative. (−3.9)(4.075)=−15.8925

Often, especially in the sciences, you will multiply decimals by powers of 10 (10, 100, 1000, etc). If you multiply a few products on paper, you may notice a pattern relating the number of zeros in the power of 10 to number of decimal places we move the decimal point to the right to get the product.

Multiply: 5.63 by 10 100 1000.

Solution

By looking at the number of zeros in the multiple of ten, we see the number of places we need to move the decimal to the right.

The image displays the text '5.63 (10)' in a simple, gray font against a white background.
There is 1 zero in 10, so move the decimal point 1 place to the right.  The number 5.63 with a light blue downward-pointing arrow originating from beneath it.
The number 56.3 is displayed in a digital font against a white background.

The image shows the mathematical expression 5.63(100), representing the multiplication of 5.63 by 100, which equals 563.
There are 2 zeroes in 100, so move the decimal point 2 places to the right. The number 5.63 is shown above a wavy, blue-green arrow pointing to the right, which could symbolize progression, flow, or a mathematical operation like rounding.
The number '563' is displayed in a dark grey font against a plain white background.

A mathematical expression showing the multiplication of 5.63 by 1,000, written as 5.63(1,000).
There are 3 zeroes in 1,000, so move the decimal point 3 place to the right. A light blue wavy arrow points to the right below the number '5.63' on a white background.
A zero must be added to the end. The number 5,630 is displayed in a clear, digital-style font against a white background.

Just as with multiplication, division of signed decimals is very much like dividing whole numbers. We just have to figure out where the decimal point must be placed and the sign of the quotient. When dividing signed decimals, first determine the sign of the quotient and then divide as if the numbers were both positive. Finally, write the quotient with the appropriate sign.

We review the notation and vocabulary for division:

In the expression a divided by b equals c, a is the dividend, b is the divisor and c is the quotient. This can be written as b right parentheses a overbar, with c on top of the bar. In this case too, a is the dividend, b is the divisor and c is the quotient.

We’ll write the steps to take when dividing decimals for easy reference.

Divide: −25.65÷(−0.06).

Solution

Remember, you can “move” the decimals in the divisor and dividend because of the Equivalent Fractions Property.

A mathematical expression showing the division of two negative decimal numbers: -25.65 ÷ (-0.06).
The signs are the same. The quotient is positive.
Make the divisor a whole number by “moving” the
decimal point all the way to the right.
“Move” the decimal point in the dividend the same
number of places.
A long division problem showing 25.65 divided by 0.06, with light blue arrows indicating the shifting of decimal points to simplify the division by a decimal.
Divide.
Place the decimal point in the quotient above the
decimal point in the dividend.
Long division calculation for 2565.0 divided by 6, showing the step-by-step process resulting in a quotient of 427.5.
Write the quotient with the appropriate sign. A mathematical equation displays the division of -25.65 by -0.06, resulting in a positive value of 427.5.

Convert Decimals, Fractions, and Percents

In our work, it is often necessary to change the form of a number. We may have to change fractions to decimals or decimals to percent.

We convert decimals into fractions by identifying the place value of the last (farthest right) digit. In the decimal 0.03. the 3 is in the hundredths place, so 100 is the denominator of the fraction equivalent to 0.03.

0.03=3100

The steps to take to convert a decimal to a fraction are summarized in the procedure box.

Write: 0.374 as a fraction 58 as a decimal.

Solution

A white background displays the numerical value 0.374 in black text, positioned centrally towards the top of the frame.
Determine the place value of the final digit. An image displaying decimal place values. The number 0.3 is above 'tenths' in red, 7 above 'hundredths' in blue, and 4 above 'thousandths' in orange.
Write the fraction for 0.374:
The numerator is 374.
The denominator is 1,000.
A fraction is displayed with 374 as the numerator and 1000 as the denominator, shown in black text on a white background.
Simplify the fraction. A mathematical expression showing the fraction (2 * 187) divided by (2 * 500), where the multiplication is represented by a middle dot.
Divide out the common factors. The image displays the fraction 187 over 500, written vertically with a horizontal line separating the numerator and the denominator.
The image shows a mathematical equation stating: so, 0.374 = 187/500. This expression converts the decimal 0.374 into its equivalent fraction 187/500.

Since a fraction bar means division, we begin by writing the fraction 58 as 85. Now divide.

The division shows that 5 is divided by 8 to yield 0.625. The result concludes that five eights is equal to negative 0.625.

A percent is a ratio whose denominator is 100. Percent means per hundred. We use the percent symbol, %, to show percent. Since a percent is a ratio, it can easily be expressed as a fraction. Percent means per 100, so the denominator of the fraction is 100. We then change the fraction to a decimal by dividing the numerator by the denominator. After doing this many times, you may see the pattern.

To convert a percent number to a decimal number, we move the decimal point two places to the left.

Figure shows the value 6 percent. An arrow indicates that the decimal is moved two places to the left. Hence the value is equal to 0.06. Similarly, 78 percent is 0.78, 2.7 percent is 0. 027 and 135 percent is 1.35.

To convert a decimal to a percent, remember that percent means per hundred. If we change the decimal to a fraction whose denominator is 100, it is easy to change that fraction to a percent. After many conversions, you may recognize the pattern.

To convert a decimal to a percent, we move the decimal point two places to the right and then add the percent sign.

Figure shows value 0.05. An arrow indicates that the decimal is moved two places to the right. Hence the value becomes 5 percent. Similarly, 0.83 is 83 percent, 1.05 is 105 percent, 0.075 is 7.5 percent and 0.3 is 30 percent.

Convert each:

percent to a decimal: 62%, 135%, and 35.7%.

decimal to a percent: 0.51, 1.25, and 0.093.

Solution

Three percentages: 62%, 135%, and 35.7%, each with a light blue, wavy, W-shaped arrow pointing downwards underneath.
Move the decimal point two places to the left. Three decimal numbers are displayed on a white background: 0.62, 1.35, and 0.357.

Three numerical values: 0.51, 1.25, and 0.093, are displayed, each accompanied by a stylized light blue 'W' symbol with an upward arrow, likely representing power output.
Move the decimal point two places to the right. Three distinct percentage values are displayed on a white background: 51%, 125%, and 9.3%.

Simplify Expressions with Square Roots

Remember that when a number n is multiplied by itself, we write n2 and read it “n squared.” The result is called the square of a number n. For example, 82 is read “8 squared” and 64 is called the square of 8. Similarly, 121 is the square of 11 because 112 is 121. It will be helpful to learn to recognize the perfect square numbers.

What about the squares of negative numbers? We know that when the signs of two numbers are the same, their product is positive. So the square of any negative number is also positive.

(−3)2=9(−8)2=64(−11)2=121(−15)2=225

Because 102=100, we say 100 is the square of 10. We also say that 10 is a square root of 100. A number whose square is m is called a square root of a number m.

Notice (−10)2=100 also, so −10 is also a square root of 100. Therefore, both 10 and −10 are square roots of 100. So, every positive number has two square roots—one positive and one negative. The radical sign, m, denotes the positive square root. The positive square root is called the principal square root. When we use the radical sign that always means we want the principal square root.

We know that every positive number has two square roots and the radical sign indicates the positive one. We write 100=10. If we want to find the negative square root of a number, we place a negative in front of the radical sign. For example, 100=−10. We read 100 as “the opposite of the principal square root of 100.”

Simplify: 25 121 144.

Solution
Demonstrates finding the square root of 25, showing both the calculation and its result.
25
Since 52=25 5
Illustrates the calculation of the square root of 121, showing the expression and its numerical value.
121
Since 112=121 11
This table explains and evaluates expressions with a negative sign outside the square root, specifically showing `-\\sqrt{144}` and its resulting value.
144
The negative is in front of the radical sign. −12

Identify Integers, Rational Numbers, Irrational Numbers, and Real Numbers

We have already described numbers as counting numbers, whole numbers, and integers. What is the difference between these types of numbers? Difference could be confused with subtraction. How about asking how we distinguish between these types of numbers?

Counting numbers1,2,3,4,.. Whole numbers0,1,2,3,4,. Integers.3,−2,−1,0,1,2,3,.

What type of numbers would we get if we started with all the integers and then included all the fractions? The numbers we would have form the set of rational numbers. A rational number is a number that can be written as a ratio of two integers.

In general, any decimal that ends after a number of digits (such as 7.3 or −1.2684) is a rational number. Simply write the decimal as a mixed number. The decimal for 13 is the number 0.3. The bar over the 3 indicates that the number 3 repeats infinitely. Continuously has an important meaning in calculus. The number(s) under the bar is called the repeating block and it repeats continuously.

Since all integers can be written as a fraction whose denominator is 1, the integers (and so also the counting and whole numbers. are rational numbers.

Every rational number can be written both as a ratio of integers pq, where p and q are integers and q0, and as a decimal that stops or repeats.

Are there any decimals that do not stop or repeat? Yes! The number π (the Greek letter pi, pronounced “pie”), which is very important in describing circles, has a decimal form that does not stop or repeat. We use three dots (…) to indicate the decimal does not stop or repeat.

π=3.141592654...

The square root of a number that is not a perfect square is a decimal that does not stop or repeat.

A numbers whose decimal form does not stop or repeat cannot be written as a fraction of integers. We call this an irrational number.

Let’s summarize a method we can use to determine whether a number is rational or irrational.

We have seen that all counting numbers are whole numbers, all whole numbers are integers, and all integers are rational numbers. The irrational numbers are numbers whose decimal form does not stop and does not repeat. When we put together the rational numbers and the irrational numbers, we get the set of real numbers.

Later in this course we will introduce numbers beyond the real numbers. Figure 2 illustrates how the number sets we’ve used so far fit together.

A chart shows that counting numbers 1, 2, 3 are a part of whole numbers 0, 1, 2, 3. Whole numbers are a part of integers minus 2, minus 1, 0, 1, 2. Integers are a part of rational numbers. Rational numbers along with irrational numbers form the set of real numbers.
This chart shows the number sets that make up the set of real numbers.

Does the term “real numbers” seem strange to you? Are there any numbers that are not “real,” and, if so, what could they be? Can we simplify −25? Is there a number whose square is −25?

()2=−25?

None of the numbers that we have dealt with so far has a square that is −25. Why? Any positive number squared is positive. Any negative number squared is positive. So we say there is no real number equal to −25. The square root of a negative number is not a real number.

Given the numbers −7,145,8,5,5.9,64, list the whole numbers integers rational numbers irrational numbers real numbers.

Solution

Remember, the whole numbers are 0,1,2,3,, so 8 is the only whole number given.

The integers are the whole numbers and their opposites (which includes 0). So the whole number 8 is an integer, and −7 is the opposite of a whole number so it is an integer, too. Also, notice that 64 is the square of 8 so 64=−8. So the integers are −7,8, and 64.

Since all integers are rational, then −7,8, and 64 are rational. Rational numbers also include fractions and decimals that repeat or stop, so 145 and 5.9 are rational. So the list of rational numbers is −7,145,8,5.9, and 64.

Remember that 5 is not a perfect square, so 5 is irrational.

All the numbers listed are real numbers.

Locate Fractions and Decimals on the Number Line

We now want to include fractions and decimals on the number line. Let’s start with fractions and locate 15,45,3,74,92,−5 and 83 on the number line.

We’ll start with the whole numbers 3 and −5 because they are the easiest to plot. See Figure 3.

The proper fractions listed are 15 and 45. We know the proper fraction 15 has value less than one and so would be located between 0 and 1. The denominator is 5, so we divide the unit from 0 to 1 into 5 equal parts 15,25,35,45. We plot 15.

Similarly, 45 is between 0 and −1. After dividing the unit into 5 equal parts we plot 45.

Finally, look at the improper fractions 74,92,83. Locating these points may be easier if you change each of them to a mixed number.

74=13492=−41283=223

Figure 3 shows the number line with all the points plotted.

Figure shows a number line with numbers ranging from minus 6 to 6. Various points on the line are highlighted. From left to right, these are: minus 5, minus 9 by 2, minus 4 by 5, 1 by 5, 4 by 5, 8 by 3 and 3.

Locate and label the following on a number line: 4,34,14,−3,65,52, and 73.

Solution

Locate and plot the integers, 4,−3.

Locate the proper fraction 34 first. The fraction 34 is between 0 and 1. Divide the distance between 0 and 1 into four equal parts, then we plot 34. Similarly plot 14.

Now locate the improper fractions 65,52, and 73. It is easier to plot them if we convert them to mixed numbers and then plot them as described above: 65=115,52=−212,73=213.

Figure shows a number line with numbers ranging from minus 6 to 6. Various points on the line are highlighted. From left to right, these are: minus 3, minus 5 by 2, minus 1 by 4, 3 by 4, 6 by 5, 7 by 3 and 4.

Since decimals are forms of fractions, locating decimals on the number line is similar to locating fractions on the number line.

Locate on the number line: 0.4 −0.74.

Solution

The decimal number 0.4 is equivalent to 410, a proper fraction, so 0.4 is located between 0 and 1. On a number line, divide the interval between 0 and 1 into 10 equal parts. Now label the parts 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0. We write 0 as 0.0 and 1 as 1.0, so that the numbers are consistently in tenths. Finally, mark 0.4 on the number line.

Figure shows a number line with numbers ranging from 0.0 to 1. 0.4 is highlighted.

The decimal −0.74 is equivalent to 74100, so it is located between 0 and −1. On a number line, mark off and label the hundredths in the interval between 0 and −1.

Figure shows a number line with numbers ranging from minus 1.00 to 0.00. Minus 0.74 is highlighted.

Key Concepts

  • How to round decimals.
    1. Locate the given place value and mark it with an arrow.
    2. Underline the digit to the right of the place value.
    3. Is the underlined digit greater than or equal to 5?
      • Yes: add 1 to the digit in the given place value.
      • No: do not change the digit in the given place value
    4. Rewrite the number, deleting all digits to the right of the rounding digit.
  • How to add or subtract decimals.
    1. Determine the sign of the sum or difference.
    2. Write the numbers so the decimal points line up vertically.
    3. Use zeros as placeholders, as needed.
    4. Add or subtract the numbers as if they were whole numbers. Then place the decimal point in the answer under the decimal points in the given numbers.
    5. Write the sum or difference with the appropriate sign
  • How to multiply decimals.
    1. Determine the sign of the product.
    2. Write in vertical format, lining up the numbers on the right. Multiply the numbers as if they were whole numbers, temporarily ignoring the decimal points.
    3. Place the decimal point. The number of decimal places in the product is the sum of the number of decimal places in the factors.
    4. Write the product with the appropriate sign.
  • How to multiply a decimal by a power of ten.
    1. Move the decimal point to the right the same number of places as the number of zeros in the power of 10.
    2. Add zeros at the end of the number as needed.
  • How to divide decimals.
    1. Determine the sign of the quotient.
    2. Make the divisor a whole number by “moving” the decimal point all the way to the right. “Move” the decimal point in the dividend the same number of places—adding zeros as needed.
    3. Divide. Place the decimal point in the quotient above the decimal point in the dividend.
    4. Write the quotient with the appropriate sign.
  • How to convert a decimal to a proper fraction and a fraction to a decimal.
    1. To convert a decimal to a proper fraction, determine the place value of the final digit.
    2. Write the fraction.
      • numerator—the “numbers” to the right of the decimal point
      • denominator—the place value corresponding to the final digit
    3. To convert a fraction to a decimal, divide the numerator of the fraction by the denominator of the fraction.
  • How to convert a percent to a decimal and a decimal to a percent.
    1. To convert a percent to a decimal, move the decimal point two places to the left after removing the percent sign.
    2. To convert a decimal to a percent, move the decimal point two places to the right and then add the percent sign.
  • Square Root Notation
    m is read “the square root of m.”
    If m=n2, then m=n, for n0.
    The square root of m, m, is the positive number whose square is m.
  • Rational or Irrational
    If the decimal form of a number
    • repeats or stops, the number is a rational number.
    • does not repeat and does not stop, the number is an irrational number.
  • Real Numbers
    A chart shows that counting numbers 1, 2, 3 are a part of whole numbers 0, 1, 2, 3. Whole numbers are a part of integers minus 2, minus 1, 0, 1, 2. Integers are a part of rational numbers. Rational numbers along with irrational numbers form the set of real numbers.

Practice Makes Perfect

Round Decimals

In the following exercises, round each number to the nearest hundredth tenth whole number.

5.781

Solution

5.78 5.8 6

1.638

0.299

Solution

0.30 0.3 0

0.697

63.479

Solution

63.48 63.5 63

84.281

Add and Subtract Decimals

In the following exercises, add or subtract.

−16.5324.38

Solution

−40.91

−19.4732.58

−38.69+31.47

Solution

−7.22

−29.83+19.76

72.5100

Solution

−27.5

86.2100

91.75(−10.462)

Solution

102.212

94.69(−12.678)

55.013.7

Solution

51.31

59.084.6

2.517.4

Solution

−4.89

3.846.1

Multiply and Divide Decimals

In the following exercises, multiply.

(94.69)(−12.678)

Solution

−1200.47982

(−8.5)(1.69)

(−5.18)(−65.23)

Solution

337.8914

(−9.16)(−68.34)

(0.06)(21.75)

Solution

1.305

(0.08)(52.45)

(9.24)(10)

Solution

92.4

(6.531)(10)

(0.025)(100)

Solution

2.5

(0.037)(100)

(55.2)(1000)

Solution

55200

(99.4)(1000)

In the following exercises, divide. Round money monetary answers to the nearest cent.

$117.25÷48

Solution

$2.44

$109.24÷36

1.44÷(−0.3)

Solution

−4.8

−1.15÷(−0.05)

5.2÷2.5

Solution

2.08

14÷0.35

Convert Decimals, Fractions and Percents

In the following exercises, write each decimal as a fraction.

0.04

Solution

125

1.464

0.095

Solution

19200

−0.375

In the following exercises, convert each fraction to a decimal.

1720

Solution

0.85

174

31025

Solution

−12.4

1811

In the following exercises, convert each percent to a decimal.

71%

Solution

0.71

150%

39.3%

Solution

0.393

7.8%

In the following exercises, convert each decimal to a percent.

1.56

Solution

156%

3

0.0625

Solution

6.25%

2.254

Simplify Expressions with Square Roots

In the following exercises, simplify.

64

Solution

8

169

144

Solution

12

4

100

Solution

−10

121

Identify Integers, Rational Numbers, Irrational Numbers, and Real Numbers

In the following exercises, list the whole numbers, integers, rational numbers, irrational numbers, real numbers for each set of numbers.

−8,0,1.95286...,125,36,9

Solution

0,36,9 −8,0,36,9 −8,0,125,36,9 1.95286..., −8,0,1.95286...,125,36,9

−9,−349,9,0.409,116,7

100,−7,83,−1,0.77,314

Solution

none 100,−7,−1
100,−7,83,−1,0.77,314
none
100,−7,83,−1,0.77,314

−6,52,0,0.714285———,215,14

Locate Fractions and Decimals on the Number Line

In the following exercises, locate the numbers on a number line.

310,72,116,4

Solution

Figure shows a number line with numbers ranging from 0 to 6. Some values are highlighted. From left to right, these are: 3 by 10, 11 by 6, 7 by 2 and 4.

710,52,138,3

34,34,123,−123,52,52

Solution

Figure shows a number line with numbers ranging from minus 4 to 4. Some values are highlighted. From left to right, these are: minus 5 by 2, minus 1 and two thirds, minus 3 by 4, 3 by 4, 1 and two thirds, and 5 by 2.

25,25,134,−134,83,83

0.8 −1.25

Solution

Figure shows a number line with numbers ranging from minus 4 to 4. Two values are highlighted. One is between minus 2 and minus 1. The other is between 0 and 1.

−0.9 −2.75

−1.6 3.25

Solution

Figure shows a number line with numbers ranging from minus 4 to 4. Two values are highlighted. One is between minus 2 and minus 1. The other is between 3 and 4.

3.1 −3.65

Writing Exercises

How does knowing about U.S. money help you learn about decimals?

Solution

Answers will vary.

When the Szetos sold their home, the selling price was 500% of what they had paid for the house 30 years ago. Explain what 500% means in this context.

In your own words, explain the difference between a rational number and an irrational number.

Solution

Answers will vary.

Explain how the sets of numbers (counting, whole, integer, rational, irrationals, reals) are related to each other.

Self Check

Use this checklist to evaluate your mastery of the objectives of this section.

This table has 4 columns, 6 rows and a header row. The header row labels each column: I can, confidently, with some help and no, I don’t get it. The statements in the first column are: round decimals, add and subtract decimals, multiply and divide decimals, convert decimals, fractions and percents, simplify expressions with square roots, identify integers, rational numbers, irrational numbers and real numbers, locate fractions and decimals on the number line. The remaining columns are blank.

On a scale of 1-10, how would you rate your mastery of this section in light of your responses on the checklist? How can you improve this?

irrational number
An irrational number is a number that cannot be written as the ratio of two integers. Its decimal form does not stop and does not repeat.
percent
A percent is a ratio whose denominator is 100.
principal square root
The positive square root is called the principal square root.
rational number
A rational number is a number of the form pq, where p and q are integers and q0. Its decimal form stops or repeats.
real number
A real number is a number that is either rational or irrational.
square of a number
If n2=m, then m is the square of n.
square root of a number
If n2=m, then n is a square root of m.